---
title: "Notification Configuration"
url: "https://podium.support.polestarglobal.com/en/article/notification-configuration"
language: "en"
last_updated: "2025-11-20T16:34:05.527Z"
---

# Notification Configuration

After defining conditions, you must set up:

-   Recipients
-   Vessel selection
-   Notification subject
-   Email content
-   Test notifications

* * *

## **1\. Recipients**

You may add as many notification recipients as needed.

1.  Click **Add Recipient**
2.  Enter:
3.  -   Recipient Name
    -   Notification Type (**EMAIL** or **SMS**)
    -   Contact details

**Formatting Requirements:**

-   Emails must be valid addresses
-   Phone numbers must include **+country code**

Click **SAVE** when done.

* * *

## **2\. Select Vessels**

Define which vessels the rule applies to.

1.  Click **CHOOSE VESSELS**
2.  Select vessels using the checkboxes
3.  Click **CONFIRM**

You may add or remove vessels at any time.

* * *

## **3\. Notification Subject**

You can customise the subject line using four toggle options:

-   Vessel Name
-   Vessel IMO
-   Rule Name
-   Event ID

Click the blue buttons to add items to the subject, or delete them manually in the text box.

* * *

## **4\. Email Content**

Users can tailor email body content using selectable data fields:

-   Vessel Name / IMO
-   Date & Time
-   Conditions Met
-   Notification Type
-   Vessel at Sea/Port
-   Position (Lat/Lon)
-   Heading, Shaft RPM
-   Speed over ground / through water
-   Instructed Speed
-   Position image

Click the blue buttons to include parameters or remove them manually.

* * *

## **5\. Test Notifications**

Users may send a **Test Notification** at any time.

-   Sends to all configured recipients
-   Does **not** require conditions to be met
-   Used to validate email/SMS delivery

* * *

## **6\. Saving and Managing Rules**

Click **Save** when the rule is fully configured.

All saved rules can be viewed, edited, or deleted through the **Vessel Rules** section.
