---
title: "Managing SSAS Contacts"
url: "https://podium.support.polestarglobal.com/en/article/managing-ssas-contacts"
language: "en"
last_updated: "2026-01-20T15:03:13.259Z"
---

# Managing SSAS Contacts

### **Managing SSAS Contacts**

You can view the SSAS Contacts via two ways.

#### **Add SSAS Contacts via Vessel Details**

1.  Navigate to Fleet and select the vessel from the left sidebar.
2.  Select Full Details → Tracking & SSAS

#### **Manage Contacts via Fleet → SSAS Alerts**

1.  Navigate to Fleet → SSAS Alerts.
2.  Select the vessel requiring contact configuration from **All Configured Vessels**.
3.  Navigate to the '**Tracking & SSAS**' tab.
4.  In the **SSAS Contacts** section, select either '**Select Existing**' or '**\+ New Contact'**.
5.  Enter the recipient’s Name and choose Email or SMS. You can add additional methods if required.
6.  -   For SMS, include the country code with a + prefix.
7.  Once the recipient is added, you can configure the following:
8.  -   **The Email Template**
    -   **Test –** Sent when the communicator triggers a SSAS alert whilst in test mode. Test alerts contain 'TEST'
    -   **Live –** Sent when the communicator triggers a real SSAS alert.
    -   **Reset –** Sent when a SSAS alert is reset.

**Notification Details:**

-   Email notifications include both a basic alert and a detailed message with vessel info, weather, and nearest port.
-   SMS notifications contain essential SSAS alert information.

* * *

### **Use Contact Lists for Multiple Vessels**

1.  Navigate to **Configure → Contact Lists**.
2.  In the Contacts tab, select New Contact to add entries to your organisation’s contact database.
3.  You can select via **Contacts** or **Contacts List**
4.  In the **Contacts** tab, select **\+ New Contact**
5.  Proceed to add any contacts with either Email or SMS
6.  In the **Contact Lists** tab, select **New SSAS List**.
7.  Add contacts from your database or create new ones.
8.  Assign the contact list to specific vessels or vessel groups.

**Select Confirm then Save to apply changes.**
